MWA150 Series
150 Watt Medical Desktop Power Supply
- 5-Year Limited Warranty
- High Efficiency: Level V
- High Power Density 5.4W/in3
- Lifetime Expectation >5 years
- Hold-up Time > 25ms at full load
- EISA, CEC Compliant
- Floating output
- Medical Approval- EN60601-1 Class I



Print DatasheetModel Overview Input/Output Configuration Mechanical Drawings Supporting Documentation Ordering Options Technical Support AvailabilityElpac Part Number Output Voltage Output Current Peak Current1 Total Regulation2 Typical Efficiency3 MWA150012A-12A 12.0V 12.5A 15.0A ±5% 89% MWA150015A-12A 15.0V 10.0A 12.0A ±5% 90% MWA150018A-12A 18.0V 8.3A 10.0A ±5% 90% MWA150024A-12A 24.0V 6.3A 7.5A ±5% 91% MWA150048A-11A 48.0V 3.2A 3.75A ±5% 92% Notes
1 Maximum peak load (180W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC (including output cable).
Input Input Voltage 85 - 264VAC; 100 - 240VAC Nominal Input Frequency 47 - 63Hz Input Current <2A rms Inrush Current <37A at 230VAC cold start Power Factor >0.97 Zero Load Power Consumption <0.5W Earth Leakage Current (Typical) <150µA @ 132VAC @ 60Hz (typical) <250µA @ 264VAC @ 60Hz (typical) Patient Leakage Current <50µA @ 132VAC @ 60Hz (typical) <75µA @ 264VAC @ 60Hz (typical) Output Output Voltage See Table Total Regulation +/-5% Minimum Load No minimum load required Start-Up Delay <1.5s Hold-Up Time >25ms at any input voltage Ripple & Noise <1% pk-pk * Over Voltage Protection 110-135% Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable Over Current Protetion 120 - 180% Short Circuit Protection shutdown, auto-restart (hiccup mode) Notes
* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.
General Efficiency Avg Efficiency 90.8% @ 115VAC; 92.8% @ 230VAC MTBF min. 200,000 hours demonstrated Size 7.56" (192mm) x 2.45" (62.2mm) x 1.52" (38.7mm) Weight 1.55 lbs (0.70 kg) Power Density 5.4W/in3 Environmental Operating Temperature 0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C) Storage Temperature -40°C to +85°C Relative Humidity 5-95%, non-condensing Cooling Natural Convection Vibration All units production tested to 19.6m/s2 EMC & Safety Emissions FCC class B, CISPR11 class B EN61000-3-2, -3 Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11 Certified by TUV to the following: 
cTUVus UL 60601-1 CAN/CSA-22.2 No.601.1-M90 CB per IEC60601-1 CE marked to LVD Input Configuration Standard Input Cable Not Provided Connection on Power Supply Body IEC 320 C14 Receptacle Output Configuration (12V, 15V) Standard Output Cable 4 ft. Cord Size 4x16awg Connector (PSU side) Switchcraft DIN-8,P/N 15BL8M (male pins) Mating Connector Switchcraft 62GB8FX (8 pin) or equivalent Output Configuration (18V, 24V) Standard Output Cable 6 ft. Cord Size 4x16awg Connector (PSU side) Switchcraft DIN-8,
P/N 15BL8M (male pins)Mating Connector Switchcraft 62GB8FX (8 pin) or equivalent Output Configuration (30V, 48V) Standard Output Cable 6 ft. Cord Size 4x18awg Connector (PSU side) Switchcraft DIN-5,
P/N 05GM5M (male pins)Mating Connector Switchcraft 57GB5FX (5 pin) or equivalent Output Pin Assignments 
Pin 1 Return Pin 2 Return Pin 3 +V1 Pin 4 Return Pin 5 +V1 Output Pin Assignments 
Pin 1 +V1 Pin 2 +V1 Pin 3 Return Pin 4 +V1 Pin 5 Return Pin 6 +V1 Pin 7 Return Pin 8 Return

Please use our technical support form if you need additional documentation.
Downloadable PDFs
TUV Certificate
CB Certificate
CE Certificate
ICCNexergy has the capability to modify our standard power supplies to meet custom specifications. With a broad standard power platform, we can quickly deliver a modified power solution in as little as three weeks. Modified options include:- Grounded Output
- Custom Connectors
- Ferrite Cores
- Custom Imprinting
- Special Packaging/Labeling
- Overmolding
- Output Cord Lengths
- White Case
Inventory Results For MWA150
Part Number Distributor Quantity Inv. Date MWA150012A-12A DIGI-KEY CORPORATION 77 2/3/2012 MWA150012A-12A NEWARK/ELEMENT14 20 2/3/2012 MWA150012A-12A MOUSER ELECTRONICS 15 2/3/2012 MWA150015A-12A DIGI-KEY CORPORATION 27 2/3/2012 MWA150015A-12A MOUSER ELECTRONICS 14 2/3/2012 MWA150018A-12A MOUSER ELECTRONICS 20 2/3/2012 MWA150018A-12A DIGI-KEY CORPORATION 8 2/3/2012 MWA150018A12A PEI-GENESIS 5 2/3/2012 MWA150024A-12A MOUSER ELECTRONICS 107 2/3/2012 MWA150024A-12A NEWARK/ELEMENT14 8 2/3/2012 MWA150048A-11A NEWARK/ELEMENT14 20 2/3/2012 MWA150048A-11A MOUSER ELECTRONICS 14 2/3/2012 Search Part Database
Medical Desktop Power Supplies
Medical Open Frame Power Supplies
ITE Desktop Power Supplies
ITE Open Frame Power Supplies
Search Our Partners
Recent News
International Components Corporation (ICC) and Nexergy Announce Merger
Merger creates the industry’s largest manufacturer of rechargeable power systems CHICAGO, IL and COLUMBUS, OH, October 28, 2010: Nexergy, Inc. (www.nexergy.com)...
US DOT Lithium Battery Rulemaking Overview
As you may know, the United States Department of Transportation (DOT) published a Notice of Proposed Rulemaking (NPRM) on January 11th, 2010 aimed at creating...
CEC Introduces Energy Efficiency Regulations for Battery Chargers
On January 12, 2012 the California Energy Commission (CEC) voted 3-0 to implement energy efficiency regulations for battery chargers. The new regulations...
Synchronized Frequency Power Supply/Battery Charger
A major medical device company approached ICCNexergy with a technical challenge regarding their development of new generation of portable medical imaging...
