FWC50 Series
50W ITE Desktop Power Supply
- High Efficiency
- Fully Regulated DC Output
- Lifetime Expectation >5 years
- Hold-up Time >14ms at full load
- Safety Approval - EN60950-1 Class I
- CEC Compliant
Print DatasheetModel Overview Input/Output Configuration Mechanical Drawings Supporting Documentation Ordering Options Technical Support AvailabilityElpac Part Number Output Voltage Output Current Peak Current1 Total Regulation2 Typical Efficiency3 FWC5012-760F 12.0V 4.2A 5.0A ±5% 83% FW5018-760F 18.0V 2.8A 3.3A ±5% 86% FW5024-760F 24.0V 2.1A 2.5A ±5% 87% Notes
1 Maximum peak load (60W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC (including output cable).
Input Input Voltage 85 - 264VAC 100 - 240VAC Nominal Input Frequency 47 - 63Hz Input Current <1.0A rms Inrush Current <37A at 230VAC cold start Zero Load Power Consumption <0.3W Touch Leakage Current <200µA @ 132VAC @ 60Hz <300µA @ 264VAC @ 60Hz Output Output Voltage See Table Total Regulation +/-5% Minimum Load No minimum load required Start-Up Delay <250ms Hold-Up Time >14ms at any input voltage Ripple & Noise <1% pk-pk ** * Over Voltage Protection 110-135% Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable Over Current Protetion 120 - 180% Short Circuit Protection shutdown, auto-restart (hiccup mode) Notes
* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.
General Efficiency Avg Efficiency 86.7% @ 115VAC; 86.9% @ 230VAC MTBF min. 100,000 hours demonstrated Size 05.00" (127.0mm) x 3.00" (76.2mm) x 1.30" (33.0mm) Weight 0.75 lbs (0.34 kg) Environmental Operating Temperature 0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C) Storage Temperature -40°C to +85°C Relative Humidity 5-95%, non-condensing Cooling Natural Convection Vibration All units production tested to 19.6m/s2 EMC & Safety Emissions FCC class B, CISPR22 class B EN61000-3-2, -3 Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11 Certified by TUV to the following: 
cTUVus UL 60950-1 CAN/CSA-22.2 No.60950-1 CB per IEC60950-1 CE marked to LVD & EMC Directive Input Configuration Standard Input Cable 6 ft cable with US standard (Nema 5-15) 3 prong connector Connection on Power Supply Body IEC 320 C14 Receptacle Output Configuration Standard Output Cable 6 ft. Cord Size 2x16awg zip Connector (PSU side) Switchcraft 760 or equivalent Mating Connector Switchcraft 712A or equivalent Output Pin Assignments 
Center +v1 Outside Return 
ICCNexergy has the capability to modify our standard power supplies to meet custom specifications. With a broad standard power platform, we can quickly deliver a modified power solution in as little as three weeks. Modified options include:- Floating Output
- Custom Connectors
- Ferrite Cores
- Custom Imprinting
- Special Packaging/Labeling
- Overmolding
- Output Cord Lengths
- White Case
Inventory Results For FWC50
Part Number Distributor Quantity Inv. Date FWC5012-760F DIGI-KEY CORPORATION 19 2/3/2012 FWC5012-760F MOUSER ELECTRONICS 15 2/3/2012 FWC5012-760F ALLIED ELECTRONICS, INC. 141 12/30/2011 FWC5012760F PEI-GENESIS 292 2/3/2012 FWC5018-760F ALLIED ELECTRONICS, INC. 66 12/30/2011 FWC5018-760F-NC NEWARK/ELEMENT14 9 2/3/2012 FWC5018760F PEI-GENESIS 21 2/3/2012 FWC5024-760F DIGI-KEY CORPORATION 92 2/3/2012 FWC5024-760F NEWARK/ELEMENT14 56 2/3/2012 FWC5024-760F MOUSER ELECTRONICS 7 2/3/2012 FWC5024-760F ALLIED ELECTRONICS, INC. 11 12/30/2011 FWC5024760F PEI-GENESIS 165 2/3/2012
