ICCNexergy

Leaders in Rechargeable Power Systems

Elpac Part NumberOutput VoltageOutput CurrentPeak Current1Total Regulation2Typical Efficiency3
FWC1805-760F5.0V3.0A4.3A±5%82%
FWC1812-760F12.0V1.5A1.8A±5%83%
FWC1815-760F15.0V1.2A1.4A±5%84%
FWC1818-760F18.0V1.0A1.2A±5%85%
FWC1824-760F24.0V0.8A0.9A±5%86%
  • Notes
  • 1 Maximum peak load (21W) lasting 500ms with a maximum 10% duty cycle.
  • 2 Includes initial setting, line regulation, load regulation, and thermal drift.
  • 3 Typical at 115VAC (including output cable).
Input
Input Voltage 85 - 264VAC 100 - 240VAC Nominal
Input Frequency 47 - 63Hz
Input Current <0.5A rms
Inrush Current <37A at 230VAC cold start
Zero Load Power Consumption <0.5W
Touch Leakage Current
<200µA @ 132VAC @ 60Hz
<350µA @ 264VAC @ 60Hz
Output
Output Voltage See Table
Total Regulation +/-5%
Minimum Load No minimum load required
Start-Up Delay <1s
Hold-Up Time >12ms at any input voltage
Ripple & Noise <1% pk-pk ** *
Over Voltage Protection 110-135%
Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable
Over Current Protetion 120 - 180%
Short Circuit Protection shutdown, auto-restart (hiccup mode)
  • Notes
  • * Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.
General
Efficiency Avg Efficiency 83.5% @ 115VAC; 81.6% @ 230VAC
MTBF min. 100,000 hours demonstrated
Size 3.35" (85.0mm) x 1.97" (50.0mm) x 1.30" (33.0mm)
Weight 0.45 lbs (0.32 kg)
Environmental
Operating Temperature 0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C)
Storage Temperature -40°C to +85°C
Relative Humidity 5-95%, non-condensing
Cooling Natural Convection
Vibration All units production tested to 19.6m/s2
EMC & Safety
Emissions FCC class B, CISPR22 class B EN61000-3-2, -3
Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11
Certified by:
cTUVus
UL 60950-1
CAN/CSA-22.2 No.950
CB per IEC60950-1
CE marked to LVD & EMC Directive
Input Configuration
Standard Input Cable 6 ft cable with US standard (Nema 5-15) 3 prong connector
Connection on Power Supply Body IEC 320 C14 Receptacle
Output Configuration
Standard Output Cable 6 ft.
Cord Size 2x16awg
Connector (PSU side) Switchcraft 760 or equivalent
Mating Connector Switchcraft 712A or equivalent
Output Pin Assignments
Center +v1
Outside Return
mechanical drawing

Please use our technical support form if you need additional documentation.

Downloadable PDFs

TUV Certificate
GS Certificate
CE Certificate
CB Certificate
UL Certificate
ICCNexergy has the capability to modify our standard power supplies to meet custom specifications. With a broad standard power platform, we can quickly deliver a modified power solution in as little as three weeks. Modified options include:
  • Floating Output
  • Custom Connectors
  • Ferrite Cores
  • Custom Imprinting
  • Special Packaging/Labeling
  • Overmolding
  • Output Cord Lengths
  • White Case

Inventory Results For FWC18

Part Number Distributor Quantity Inv. Date
FWC1805-760F DIGI-KEY CORPORATION 143 2/3/2012
FWC1805-760F MOUSER ELECTRONICS 81 2/3/2012
FWC1805-760F NEWARK/ELEMENT14 43 2/3/2012
FWC1805-760F ALLIED ELECTRONICS, INC. 37 12/30/2011
FWC1805760F PEI-GENESIS 142 2/3/2012
FWC1818-760F DIGI-KEY CORPORATION 237 2/3/2012
FWC1818760F PEI-GENESIS 5 2/3/2012
FWC1824-760F DIGI-KEY CORPORATION 90 2/3/2012
FWC1824-760F MOUSER ELECTRONICS 84 2/3/2012
FWC1824-760F NEWARK/ELEMENT14 18 2/3/2012
FWC1824-760F ALLIED ELECTRONICS, INC. 53 12/30/2011
FWC1824760F PEI-GENESIS 11 2/3/2012