ICCNexergy

Leaders in Rechargeable Power Systems

fwa150-elpac-power-supplies

FWA150 Series

150 Watt ITE Desktop Power Supply

  • High Efficiency: Level V
  • High Power Density 5.4W/in3
  • Lifetime Expectation >5 years
  • Hold-up Time >25ms at full load
  • Power Factor Correction
  • EISA, CEC Compliant
  • Safety Approval - EN6050-1
  • Class I
  • CEC
  • TUV-RL
  • RoHS
  • CE
  • Level-V
Print Datasheet
Elpac Part NumberOutput VoltageOutput CurrentPeak Current1Total Regulation2Typical Efficiency3
FWA150012A-12B12.0V12.5A15.0A±5%89%
FWA150015A-12B15.0V10.0A12.0A±5%90%
FWA150018A-12B18.0V8.3A10.0A±5%90%
FWA150024A-12B24.0V6.3A7.5A±5%91%
FWA150048A-11B48.0V3.2A3.75A±5%92%
  • Notes
  • 1 Maximum peak load (180W) lasting 500ms with a maximum 10% duty cycle.
  • 2 Includes initial setting, line regulation, load regulation, and thermal drift.
  • 3 Typical at 115VAC (including output cable).
Input
Input Voltage 85 - 264VAC; 100 - 240VAC Nominal
Input Frequency 47 - 63Hz
Input Current <2A rms
Inrush Current <37A at 230VAC cold start
Power Factor >0.97
Zero Load Power Consumption <0.5W
Touch Leakage Current
<150µA @ 132VAC @ 60Hz
<250µA @ 264VAC @ 60Hz
Output
Output Voltage See Table
Total Regulation +/-5%
Minimum Load No minimum load required
Start-Up Delay <1.5s
Hold-Up Time >25ms at any input voltage
Ripple & Noise <1% pk-pk *
Over Voltage Protection 110-135%
Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable
Over Current Protetion 120 - 180%
Short Circuit Protection shutdown, auto-restart (hiccup mode)
  • Notes
  • * Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.
General
Efficiency Avg Efficiency 90.8% @ 115VAC; 92.8% @ 230VAC
MTBF min. 200,000 hours demonstrated
Size 7.56" (192mm) x 2.45" (62.2mm) x 1.52" (38.7mm)
Weight 1.55 lbs (0.70 kg)
Power Density 5.4W/in3
Environmental
Operating Temperature 0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C)
Storage Temperature -40°C to +85°C
Relative Humidity 5-95%, non-condensing
Cooling Natural Convection
Vibration All units production tested to 19.6m/s2
EMC & Safety
Emissions FCC class B, CISPR22 class B Conducted and Radiated
Immunity EN61000-3-2, -3; EN61000-4-2, -3, -4, -5, -6, -8, -11
Certified by TUV to the following:
cTUVus
UL 60950-1
CAN/CSA-22.2 No.60950-1
CB per IEC60950-1
CE marked to LVD & EMC Directive
Input Configuration
Standard Input Cable 6 ft cable with US standard (Nema 5-15) 3 prong connector
Connection on Power Supply Body IEC 320 C14 Receptacle
Output Configuration (12V, 15V)
Standard Output Cable 4 ft.
Cord Size 4x16awg
Connector (PSU side) Switchcraft DIN-8,P/N 15BL8M (male pins)
Mating Connector Switchcraft 62GB8FX (8 pin) or equivalent
Output Configuration (18V, 24V)
Standard Output Cable 6 ft.
Cord Size 4x16awg
Connector (PSU side) Switchcraft DIN-8,
P/N 15BL8M (male pins)
Mating Connector Switchcraft 62GB8FX (8 pin) or equivalent
Output Configuration (30V, 48V)
Standard Output Cable 6 ft.
Cord Size 4x18awg
Connector (PSU side) Switchcraft DIN-5,
P/N 05GM5M (male pins)
Mating Connector Switchcraft 57GB5FX (5 pin) or equivalent
Output Pin Assignments
Pin 1 Return
Pin 2 Return
Pin 3 +V1
Pin 4 Return
Pin 5 +V1
Output Pin Assignments
Pin 1 +V1
Pin 2 +V1
Pin 3 Return
Pin 4 +V1
Pin 5 Return
Pin 6 +V1
Pin 7 Return
Pin 8 Return

mechanical drawing
ICCNexergy has the capability to modify our standard power supplies to meet custom specifications. With a broad standard power platform, we can quickly deliver a modified power solution in as little as three weeks. Modified options include:
  • Floating Output
  • Custom Connectors
  • Ferrite Cores
  • Custom Imprinting
  • Special Packaging/Labeling
  • Overmolding
  • Output Cord Lengths
  • White Case

Inventory Results For FWA150

Part Number Distributor Quantity Inv. Date
FWA150012A-12B DIGI-KEY CORPORATION 91 2/3/2012
FWA150012A-12B NEWARK/ELEMENT14 19 2/3/2012
FWA150012A-12B MOUSER ELECTRONICS 10 2/3/2012
FWA150012A-12B ALLIED ELECTRONICS, INC. 23 12/30/2011
FWA150015A-12B MOUSER ELECTRONICS 42 2/3/2012
FWA150015A-12B DIGI-KEY CORPORATION 18 2/3/2012
FWA150015A-12B NEWARK/ELEMENT14 11 2/3/2012
FWA150015A12B PEI-GENESIS 47 2/3/2012
FWA150018A-12B MOUSER ELECTRONICS 12 2/3/2012
FWA150018A-12B DIGI-KEY CORPORATION 3 2/3/2012
FWA150018A12B PEI-GENESIS 33 2/3/2012
FWA150024A-12B DIGI-KEY CORPORATION 166 2/3/2012
FWA150024A-12B MOUSER ELECTRONICS 10 2/3/2012
FWA150024A-12B NEWARK/ELEMENT14 3 2/3/2012
FWA150024A12B PEI-GENESIS 107 2/3/2012
FWA150048A-11B MOUSER ELECTRONICS 20 2/3/2012
FWA150048A-11B NEWARK/ELEMENT14 19 2/3/2012

Recent News

International Components Corporation (ICC) and Nexergy Announce Merger
Merger creates the industry’s largest manufacturer of rechargeable power systems CHICAGO, IL and COLUMBUS, OH, October 28, 2010: Nexergy, Inc. (www.nexergy.com)...

US DOT Lithium Battery Rulemaking Overview
As you may know, the United States Department of Transportation (DOT) published a Notice of Proposed Rulemaking (NPRM) on January 11th, 2010 aimed at creating...

CEC Introduces Energy Efficiency Regulations for Battery Chargers
On January 12, 2012 the California Energy Commission (CEC) voted 3-0 to implement energy efficiency regulations for battery chargers. The new regulations...

Synchronized Frequency Power Supply/Battery Charger
A major medical device company approached ICCNexergy with a technical challenge regarding their development of new generation of portable medical imaging...